Connecting A Paired Bluetooth ® Device - Panasonic RZ-S500W Operating Instructions Manual

Connecting a paired Bluetooth
1
Take the earphones out of the charging cradle.
• The earphone LEDs light (blue) and the earphones turn on about 3 seconds later.
A beep will sound, and the earphone LEDs (blue)* will blink slowly.
* The batteries are low when they are blinking in red.
2
Do Steps 2 to 3 of "Connecting by pairing (registering) your earphones with a
®
Bluetooth device" (
3
Confirm that the earphones and the Bluetooth
Note
• This unit remembers the device lastly connected. Connection may be automatically established after step 1 (see
above).
Preparation
®
device
14).
l
®
device are connected.
15