Using The External Sound Control (Rz-B310W); Activating Voice Functions - Panasonic RZ-B310WDE-K Owner's Manual

Operation

Using the external sound control (RZ-B310W)

The external sound control function switches between Active noise cancelling and Ambient
sound.
n Active noise cancelling
Reduces the sounds (noise) you can hear from outside.
R Setting noise cancelling to ON changes the volume and sound quality. The sound quality is set
to the optimum.
R While using the noise cancelling function, a very small amount of noise which is generated
from the circuit that reduces noise may be heard, but this is normal and not indicative of any
trouble. (This very-low-level noise may be heard in quiet places or in the blank parts between
tracks.)
n Ambient sound
You can hear ambient sound through the microphones embedded in the earphones while
enjoying music.
Note:
R If the earphones are covered with your hand or case, howling may occur. Do not cover and
use the unit continuously.
1
While wearing the earphones, touch and hold the touch sensor (L or R) for about 3
seconds.
R The mode is switched each time you touch and hold the touch sensor. (A guidance
message will notify you of the mode you switched to.)
Off Ambient sound
2
Adjust the volume of the playback device.

Activating voice functions

You can use a touch sensor on the earphone to activate the voice functions (Siri, Google
Assistant, etc.) on your smartphone or similar device.
1
Connect the Bluetooth
device")
2
Touch the touch sensor (L or R) rapidly on the earphone 3 times to activate the voice
function.
R The voice assistant function on the Bluetooth
Note:
R For details about voice function commands, refer to the operating instructions for the
®
Bluetooth device.
R The voice function may not work depending on the smartphone, etc. and specifications.
12
Noise cancelling
®
device and the unit. (page 9, "Connecting to a Bluetooth
® device is activated.
. . .
Off
®