Connecting A Bluetooth Device; Connecting By Pairing (Registering) Your Earphones With A Bluetooth ® Device - Panasonic RZ-S500W Operating Instructions Manual

Digital wireless stereo earphones
Hide thumbs Also See for RZ-S500W:
Table of Contents

Advertisement

Connecting a Bluetooth
Preparation
• Put the earphones into the charging cradle.
®
• Place the Bluetooth
• Check the device operation using its operation instructions as required.
• Using the "Panasonic Audio Connect" app (free of charge) makes connecting with Bluetooth
Connecting by pairing (registering) your earphones with a Bluetooth
1
Take both earphones (L and R) out of the charging cradle.
• When pairing with a device for the first time:
This unit will start to search for a Bluetooth
in blue and red.
• When pairing with a device after the first time:
Taking the earphones out of the charging cradle will light the earphone LEDs (blue). While the earphone LEDs
light (blue) (about 3 seconds), if you touch and hold the touch sensor (L or R) for about 7 seconds, the
earphone LEDs will light alternately in blue and red.
2
Turn on the Bluetooth
3
From the Bluetooth
select device name "RZ-S500W" or "RZ-S300W".
• A BD address (Bluetooth
string that is displayed by and unique to the device) may be displayed
before "RZ-S500W" or "RZ-S300W" is displayed.
• If prompted for a passkey, input the passkey "0000 (four zeros)" of this
unit.
• When the earphone LEDs blink (blue)* twice at approximately 5 second
intervals, pairing has been completed and connection has been
established.
* The batteries are low when they are blinking in red.
4
Confirm that the earphones and the Bluetooth
Note
• If the connection with the device does not complete within 5 minutes, the pairing mode on the earphones cancels and
they transition to connection standby mode. Perform pairing again.
• You can pair a maximum of 10 Bluetooth
has been exceeded, previous devices are overwritten. To use overwritten devices again, do the pairing again.
device within approx. 1 m from the unit.
®
device and enable the Bluetooth
®
menu of the Bluetooth
®
Device address: an alphanumeric character
®
devices with the earphones. When you pair a device after the maximum
Preparation
®
device
®
device to connect to, and the earphone LEDs will light alternately
®
device,
®
device are connected.
14
®
simple. (
®
device
®
function.
e.g. [RZ-S500W]
Bluetooth
Bluetooth
ON
Device
RZ-S500W
l
13)
Select

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rz-s300w

Table of Contents