Making A Phone Call - Panasonic RZ-S500W Operating Instructions Manual

Making a phone call

®
With Bluetooth enabled phones (cell phones or smartphones) that support the "HSP" or "HFP" Bluetooth
profile, you can use the unit for phone calls.
• HSP (Headset Profile):
This profile can be used to receive monaural sounds and establish two-way communication using the
microphone on the unit.
• HFP (Hands-Free Profile):
In addition to the HSP functions, this profile has the incoming and outgoing calls function.
(This unit does not have a function that allows you to make phone calls independently of a Bluetooth
phone.)
1
Connect the Bluetooth
2
Touch a touch sensor (L or R) on the earphone once to answer an incoming call.
• During an incoming call, ringtone will sound from the unit and the earphone LEDs will blink.
• (HFP only) To reject a phone call, touch and hold a touch sensor (L or R) for about 2 seconds.
3
Start talking.
• The earphone LEDs will repeatedly blink 2 times during a call.
• The volume can be adjusted during a phone call.
For operating procedures (
4
Touch and hold an earphone touch sensor (L or R) for about 2 seconds to end the call.
Note
• There may be instances when hands free setting needs to be done on the Bluetooth
• Depending on the Bluetooth
the unit.
• You can have the Bluetooth
®
Bluetooth enabled phone. (
®
device and the unit. (
l
20, "Operating with the touch sensors")
®
enabled phone, you may hear incoming and outgoing call ringtones of the phone from
®
enabled phone make phone calls by using the microphone of the unit and an app of the
l
19, "Activating voice functions")
Operation
14, "Connecting a Bluetooth
l
17
®
®
device")
®
enabled phone.
®
enabled