Making A Phone Call - Panasonic Technics EAH-AZ60 Owner's Manual

Making a phone call

®
With Bluetooth enabled phones (cell phones or smartphones) that support the "HSP" or "HFP" Bluetooth
profile, you can use the unit for phone calls.
• HSP (Headset Profile):
This profile can be used to receive monaural sounds and establish two-way communication using the
microphone on the unit.
• HFP (Hands-Free Profile):
In addition to the HSP functions, this profile has the incoming and outgoing calls function.
(This unit does not have a function that allows you to make phone calls independently of a Bluetooth
phone.)
1
Connect the Bluetooth
2
Touch a touch sensor (L or R) on the earphone once to answer an incoming call.
• During an incoming call, ringtone will sound from the unit and the earphone LEDs will blink.
• (HFP only) To reject a phone call, touch and hold a touch sensor (L or R) for about 2 seconds.
3
Start talking.
• The earphone LEDs will repeatedly blink 2 times during a call.
• To mute the voice during a call, touch the touch sensor (R) twice.
(To cancel muting, touch the touch sensor (R) twice again while muting.)
• To switch the noise level of the other party during a call, touch the touch sensor (R) 3 times.
Voices will be easier to hear when you reduce the audio noise from the other party.
This function is effective in reducing the noise heard from continuous sources (ventilation fans, etc.) in the
vicinity of the other party.
• The volume can be adjusted during a phone call.
For operating procedures (
4
Touch and hold an earphone touch sensor (L or R) for about 2 seconds to end the call.
Note
• There may be instances when hands free setting needs to be done on the Bluetooth
• Depending on the Bluetooth
the unit.
• You can have the Bluetooth
®
Bluetooth enabled phone. (
®
device and the unit. (
l 28, "Operating with the touch sensors")
®
enabled phone, you may hear incoming and outgoing call ringtones of the phone from
®
enabled phone make phone calls by using the microphone of the unit and an app of the
l
26, "Activating voice functions")
Operation
21, "Connecting a Bluetooth
l
24
®
®
device")
®
enabled phone.
®
enabled