Boston Scientific Vercise Neural Navigator 4.0 Installation Manual page 14

Vercise™ Neural Navigator 4.0 Installation Guide
6. When prompted, select Yes to proceed with the uninstallation and then select Finish once the uninstallation is
complete.
7. When prompted, select OK to restart the CP.
8. Confirm the software was successfully uninstalled (Figure 19).
Note: Once the software is uninstalled, the two buttons displayed next to the software title will be "Install" and
"Remove" (Figure 19).
9. If desired, the software can be completely removed from the CP after uninstallation by selecting the Remove button
adjacent to the software title (Figure 20).
Note: After the software has been removed from the CP, the software can be reinstalled at a later date using an
Installer USB.
10. Select Yes to proceed with the software removal.
Vercise™ Neural Navigator 4.0 Installation Guide
92441272-02 12 of 359
Figure 19. Uninstallation Confirmation
Figure 20. Remove Software