Cautions; Electrical And Mechanical Safety; Fire Hazards - InMode System with BodyFX Handpiece Operator's Manual

Cautions

The following cautions should be heeded for safe System use:
 Do not touch the System's inner parts.
 Service is supplied by company-authorized personal only.
 To avoid damage, do not allow the Handpiece to come in contact with hard
materials.

Electrical and Mechanical Safety

 Keep all covers and panels of the System closed. Removing the covers creates a
safety hazard.
 Keep hands away from the applicator during the System start-up.
 Perform maintenance procedures when the System is shut down and disconnected
from the power.
 The System is grounded through the grounding conductor in the power cable. This
protective grounding is essential for safe operation.
 Provide as much distance as possible between the system and other electronic
equipment because the activated RF generator may cause interference between
them.
 Move the System slowly and carefully. The System weighs approximately 30kg
(66lb.) and may cause injury if proper care is not used when moving it.

Fire Hazards

 The conducted RF energy may raise the temperature of the material if misused.
Do not use the System in the presence of explosive or flammable materials.
 Keep drapes and towels moist to prevent them from igniting and burning as a
result of misuse. Use non-flammable prepping solutions.
 Do not use flammable substances when preparing the skin for treatment. Be
especially careful with the use of oxygen.
 If alcohol is used for cleaning and disinfecting, it must be allowed to dry
thoroughly before the System is used.
InMode BodyFX Operator Manual 9