Pre-Treatment Recommendations; Treatment Recommendations - InMode System with BodyFX Handpiece Operator's Manual

Pre-Treatment Recommendations

During the patient's first visit the treating attendant should:
 Complete or update the patient's medical and physical history.
 Exclude from treatment anyone with the listed contraindications.
 Determine why the patient is seeking treatment and what his/her expectations are.
 Inform the patient about treatment arrangement, typical treatment results and possible
side effects and discomfort.
 Instruct the patient about the safety warnings.
 The patient should discontinue any irritant topical agents for 2-3 days prior to
treatment and if medically permitted, anticoagulants should be stopped 1-2 weeks
prior treatment.
Long and dense hairs may affect the treatment, and may be shaved
according to physician's discretion.
 Clean the Handpiece with alcohol 70% or other disinfectant. Use alcohol-soaked
cotton buds to clean inside the Handpiece cavity.

Treatment Recommendations

1. Ensure that skin is clean and dry.
2. No gel allowed!
3. Follow Device Start-Up Procedure from Section 5.
4. Set treatment parameters. Suggested treatment parameters are shown in the table
below:
Treatment
Approach
Sensitive skin
e.g..arm, inner thigh
Normal skin
e.g. abdomen, flanks
Resistant skin
e.g. buttocks, outer
thigh
InMode BodyFX Operator Manual
RF Power Pulse Width
[Sec]
30-40
35-45
40-50
Measured
Skin
Temperature
[ºC]
2 38-40
3 40-41
4 41-43
30