Emc Safety For The Inmode Device - InMode System with BodyFX Handpiece Operator's Manual

Table of Contents

Advertisement

EMC Safety for the InMode Device

The device has been tested and found to comply with the limits for the medical devices to
the IEC 60601-1-2. These limits are designed to provide reasonable protection against
harmful interference in a typical clinical installation. This device generates uses and can
radiate radio frequency energy. If not installed and used in accordance with the
instructions, may cause harmful interference to other devices in the vicinity. However,
there is no guarantee that the interference to other devices, which can be determined by
turning the device off and on, is caused by this instrument.
The user is encouraged to try to correct the interference by one or more of the
following measures :
 Reorient or relocate the receiving device.
 Increase the separation between the devices.
 Connect the device into an outlet on a circuit different from that which was
previously used.
 Consult Invasix service personnel for help.
Interference to the device may be caused by portable and mobile RF
communication equipment. In case of an interruption, beware of such a device in
the vicinity.
 Use of the system with any accessory, transducer or cable other than those
specified may result in increased EMISSIONS or decreased IMMUNITY than
those specified.
 The system should not be used adjacent to or stacked with other equipment. If
adjacent or stacked use is necessary, the system should be observed to verify
normal operation in the configuration in which it will be used.
InMode BodyFX Operator Manual
39

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the InMode System with BodyFX Handpiece and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF