Supermicro X11DDW-L/NT User Manual page 131

Chapter 4: UEFI BIOS
Configuration Address Source
Use this feature to select the IP address source for this computer. If Static is selected, you
will need to know the IP address of this computer and enter it to the system manually in the
field. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server attached to the network and request the next available IP address for this
computer. The options are DHCP and Static.
VLAN
Select Enabled to enable IPMI VLAN function support. The default setting is Disabled.
IPv6 Support
Select Enabled for IPv6 support. The options are Enabled, and Disabled. If this option is set
to Enabled, the following item will display:
Configuration Address Source
Use this feature to select the IP address source for this computer. If Static is selected, you
will need to know the IP address of this computer and enter it to the system manually in the
field. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server attached to the network and request the next available IP address for this
computer. The options are DHCP and Static
133