Supermicro X11DDW-L/NT User Manual page 209

Enable DHCP
Use this feature to disable/enable dynamic host configuration protocol (DHCP) server service
for the iSCSI initiator. The options are Disabled and Enabled.
Note: Set the feature, Enable DHCP, to Disabled if you would like to specify the iSCSI
initiator IP address/subnet mask/gateway.
Initiator IP Address (available when Enable DHCP is set to Disabled)
Use this feature to enter the desired iSCSI initiator IP address.
Appendix G: Configuring iSCSI Settings
211