Supermicro X11DDW-L/NT User Manual page 139

Chapter 4: UEFI BIOS
Default Options
Restore Optimized Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter> to load
manufacturer default settings which are intended for maximum system performance but not
for maximum stability.
Save As User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save all changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use
this feature to retrieve user-defined default settings that were saved previously.
Boot Override
IBA 40-10G Slot 1C00 v1066
This feature allows the user to override the Boot priorities sequence in the Boot menu, and
immediately boot the system with a device specified by the user instead of the one specified
in the boot list. This is a one-time override.
Launch EFI Shell from filesystem device
This feature allows the user to launch EFI Shell application(Shell.efi) from one of the available
filesystem devices.
141