Supermicro X11DDW-L/NT User Manual page 42

Super X11DDW-L/NT User's Manual
VGA Port
The onboard VGA port is located next to IPMI LAN port on the I/O back panel. Use this
connection for VGA display.
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) switch (UID) and a UID LED Indicator (LE1) are located on the I/O
back panel. When you press the UID switch, the UID LED indicator will be turned on. Press
the UID switch again to turn off the LED. The UID Indicator provides easy identification of a
system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website at http://www.
supermicro.com.
JL1
JNVI2C2
VROC (JRK1)
CPU2
FAN6 FAN5
UID Switch
Pin Definitions
Pin# Definition
1 Ground
2 Ground
3 Button In
4 Button In
2 3
LE1
JUIDB1 C
A
USB2/3
(3.0)
LAN2 LAN1
JM2_1
LE3
C621
S-SATA 0~3 I-SATA 0~3 I-SATA 4~7 JBT1
T-SGPIO3
SRW1
BIOS LICENSE
MAC CODE BAR CODE
BT1
X11DDW-L PWRRST PS UID NIC NIC HDD
ON FAIL LED 2 1 LED
REV:1.02
DESIGNED IN USA
CPU1
FAN4 FAN3
44
UID LED
Pin Definitions
Color Status
Blue: On Unit Identified
1
VGA
IPMI_LAN
USB0/1(3.0)
10G PHY
JSTBY1
BMC
LEDM1
JAOM JF1
LE2
PWR X NMI
LED
FAN2 FAN1
1. VGA Port
2. UID Switch
3. UID LED