Super X11DDW-L/NT User's Manual
Motherboard Features
CPU
•
This motherboard supports dual Intel Xeon Scalable-SP and 2nd Gen Intel Xeon Scalable-SP processors (Socket P) which
offer two Intel® UltraPath Interconnect (UPI) links of up to 10.4 G/s
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 16 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 3TB of 3DS Load Reduced DIMM (3DS LRDIMM), Load Reduced DIMM
(LRDIMM), 3DS Registered DIMM (3DS RDIMM), Registered DIMM (RDIMM), Non-Volatile DIMM (NV-DIMM) DDR4
(288-pin) ECC 2933*/2666/2400/2133 MHz memory in 12 memory slots.
Note: 1. Support for 2933 MHz memory is dependent on the CPU SKU 2. Up to 4TB of memory is supported with
DCPMM modules installed.
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C621 (X11DDW-L)
•
Intel C622 (X11DDW-NT)
Expansion Slots
•
One (1) PCI-Express 3.0 (x16 + x16) slot supported by CPU1 and CPU2 for Left Riser Card (SXB1)
•
One (1) PCI-Express 3.0 x16 slot supported by CPU2 for Right Riser Card (SXB2)
•
One (1) PCI-Express 3.0 x16 slot supported by CPU1 for SAS3 AOM controller (JAOM)
BaseBoard Management Controller (BMC)
•
ASPEED AST 2500 Baseboard Management Controller (BMC) supports IPMI 2.0
•
One (1) dedicated IPMI LAN located on the rear IO backpanel
Graphics
•
Graphics controller via ASPEED AST 2500 BMC (BaseBoard Management Controller)
I/O Devices
•
SATA 3.0
•
RAID (PCH)
Peripheral Devices
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 0/1)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 2/3)
•
Two (2) USB 3.0 front accessible header (USB 4/5)
Motherboard Features
Fourteen (14) SATA ports
•
I-SATA0~3, I-SATA4~7
•
S-SATA0~3
•
S-SATA4,S-SATA5 (SuperDOM support)
•
RAID 0, 1, 5, 10
16