Supermicro X11DDW-L/NT User Manual page 53

TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, which
is available from Supermicro (optional). A TPM/Port 80 connector is a security device that
supports encryption and authentication in hard drives. It allows the motherboard to deny
access if the TPM associated with the hard drive is not installed in the system. See the table
below for pin definitions.
JL1
JNVI2C2
VROC (JRK1)
CPU2
FAN6 FAN5
Trusted Platform Module/Port 80 Header
Pin Definitions
Pin# Definition Pin#
1 +3.3V 2
3 RESET# 4
5 SPI_CLK 6
7 SPI_MOSI 8
9 +3.3V Stdby 10
LE1
JUIDB1 C
A
USB2/3
(3.0)
LAN2 LAN1
IPMI_LAN
USB0/1(3.0)
JM2_1
LE3
C621
S-SATA 0~3 JBT1
I-SATA 0~3 I-SATA 4~7
T-SGPIO3
SRW1
BIOS LICENSE
MAC CODE BAR CODE
BT1
X11DDW-L PWRRST PS UID NIC NIC HDD PWR X NMI
ON FAIL LED 2 1 LED LED
REV:1.02
DESIGNED IN USA
CPU1
FAN4 FAN3
55
Definition
SPI_CS#
SPI_MISO
GND
SPI_IRQ#
1. TPM/Port 80 Header
VGA
10G PHY
JSTBY1
BMC
LEDM1
1
JAOM
JF1
LE2
FAN2 FAN1
Chapter 2: Installation