Table of Contents
Advertisement
A R M I N G A W A Y : S E T T I N G T H E A L A R M W H E N L E A V I N G
System Trouble
If you attempt to arm with the yellow Go-Anywhere Hub TROUBLE icon lit, a 3-second tone will sound and a voice
prompt will inform you of the inability to arm. This icon indicates that the system has detected a problem that may
prevent it from operating normally. A number corresponding to the trouble will then "scroll" in the Window display (for
example, "E" followed by "02" for a 'E-02 Low Battery' indication). Refer to SYSTEM TROUBLE ERROR CODES
(on page 21) for descriptions of these troubles. If you cannot correct the problem immediately, press RESET and you
will then be able to arm the system in this condition. Note: If you cannot clear the trouble, have the system checked
as soon as possible.
Area Arming (Optional)
In a system that has been partitioned into multiple Areas, one or more Areas may be armed while others remain disarmed.
Change Area
Allows you to arm / disarm other Areas in a partitioned system. To arm a different Area:
1. Press the numerical key representing the other Area number.
2. Press
followed by ENTER. The keypad will now provide status and control of that Area.
3. Enter your code followed by AWAY to arm.
4. Press
followed by ENTER to return to the home Area.
Global Arming
To arm all Areas simultaneously (including the Area you are in), press 9
To disarm all Areas simultaneously, press 0
The User Code must be valid in both Areas.
If any zone is not secured, the yellow TROUBLE light will turn on. All faulted zones in the respective Area(s) must be
secured or bypassed. Note: If a system trouble is indicated, the system cannot be armed using this method.
8
and enter your User Code followed by ENTER.
and enter your User Code followed by AWAY.
Advertisement
Table of Contents
