Central-Station Monitoring - NAPCO iSecure ISEC-WL-KEYPAD Operating Manual

Wireless battery-powered standard keypad
Table of Contents

Advertisement

Your alarm specialist may have
programmed
your
system
monitored by a central station. The Go-
Anywhere Hub has a built-in radio / Inter-
net communicator that can transmit
emergency signals and status reports to
the central station 24 hours a day.
Communicator Features
Abort Delay. Ask your installer
which of your zones have Abort De-
lay, a delay that enables you to reset
the system before it communicates to
the central station. Your system has
a SIA CP-01 required Abort Delay of
30 seconds (it may be removed or
increased up to 45 seconds, at your
option, by consulting with your install-
er).
Regular
Burglary
(Non-24-Hour)
Zone
reports
are
disarming within the delay period.
24-Hour
Zones
and
programmed to report restores must
be restored first, then the Go-
Anywhere Hub armed and disarmed,
all within the delay period.
Opening
and/or
C E N T R A L S T A T I O N M O N I T O R I N G
Reporting. Your system can notify
to
be
the central station every time it is
disarmed or armed. Any or all of up to
96 different users can each be identified.
If your system reports on arming (Closing
NOTIFIED UPON ALARM CONDITION
EMERGENCY
SERVICE
DISPATCH
aborted
by
zones
PROTECTED PREMISES
Closing
EMERGENCY SERVICES
RADIO and/or INTERNET
COMMUNICATOR
RADIO and/or INTERNET
COMMUNICATOR
Report),
the
central
acknowledge arming. This will signal at
the keypad as a "ringback" beep. Note:
If the ringback signal is not heard, call for
service.
(MONITORS
YOUR SYSTEM
24 HOURS A
DAY)
CENTRAL STATION
PROTECTED PREMISES
station
will
17

Advertisement

Table of Contents
loading

Table of Contents