Table of Contents
Advertisement
1.
Window.
Lights indicate system
status
messages;
indicates related zone, function or
error
message
numbers.
"Lb" ("low battery") appears when key-
pad battery must be replaced (see
Troubleshooting on page 24)
2.
Dot. Hub/keypad wireless connection
status. Off when transmitting data, lit
after receiving Hub transmissions. Will
turn off after Hub AC power is removed.
3.
Chime.
Indicates the door chime
option is enabled (turned on).
4.
MENU Button.
Selects available
system functions as displayed in the
Window.
The selected function is
executed by pressing ENTER.
5.
BYPASS Button.
(1) Deactivates
selected zones in the system. (2)
Unbypasses a bypassed zone.
6.
RESET Button.
(1) Resets various
system troubles, displays, etc. (see
text) (2) Resets the ISEC-SMOKE
smoke detector(s) in the system.
7.
Numerical Keys (1-9, 0).
enter codes, zone numbers, etc.
K E Y P A D C O N T R O L S & I N D I C A T O R S
8.
Emergency Buttons. Used with the
digit
display
AREA (
emergency, as follows:
Note:
Press the 7 and the
Emergency.
Press the 8 and the
Auxiliary Emergency.
Press the 9 and the
Police Emergency.
9.
AREA Button (
Areas and is used with Emergency
Buttons (described above).
10. AWAY Button. (1) Arms all zones in
the system.
display backward. (3) Answers "NO" to
questions in the Window display.
11. STAY Button. (1) Bypasses all Interi-
or
Zones
Mode") to allow free movement within
the premises. Hold down STAY when
the system is armed in "STAY Mode"
to cancel entry delay on Exit/Entry
zones, to cause an instant alarm upon
violation.
Used to
display forward. (3) Answers "YES" to
) button to signal an audible
buttons for Fire
buttons for
buttons for
).
Selects other
(2) Scrolls Window
simultaneously
("STAY
(2) Scrolls the Window
questions in the Window display.
12. ENTER Button.
Entry key.
the entered code or selected function
to be executed.
13. Room Light Sensor. Measures am-
bient light level to determine if Window
backlight should be turned on after a
keypad button press.
Windows Backlight on page 18.
14. System Status Messages.
es appear in the Window display when
active.
Includes FIRE, TROUBLE,
ARMED, INSTANT, STAY, BYPASS,
CANCL'D, AWAY and READY.
For example, when the system is
ready to be armed, the word "READY"
appears, and will not appear if a zone
is not secured (the unsecured zone
number will also display in the Win-
dow). If a zone has been bypassed,
the word BYPASS will always appear
(while disarmed or armed). The word
ARMED will appear to indicate that the
system is armed.
If an alarm has
occurred, the word ARMED will be
flashing.
Causes
See Keypad
Messag-
5
Advertisement
Table of Contents
