Table of Contents
Advertisement
The following are brief descriptions of terms and features used in this guide that may be unfamiliar to you. Some of the
features are programmable options that may or may not apply to your particular system.
Abort Delay - A delay period that allows
the Go-Anywhere Hub to be reset,
thus aborting a report to a central
station.
Access Code - A User Code (up to 6
digits) used to remotely unlock a door.
Ambush Code - A 2-digit prefix code
entered just prior to your normal User
Code when forced to disarm. Sends a
silent alarm to the central station with
no indication at the keypad.
Area - Some systems may be divided, or
partitioned,
into
two
independent subsystems, which are
referred to as Areas. Each of the 2
(maximum) Areas may be controlled
by its own keypad or by a keypad of a
different Area through the "Change
Area" feature.
Arming/Disarming - Turning the system
on or off, as follows:
Arming = Code + STAY or AWAY;
Disarming = Code + ENTER.
Arming STAY - Arming with Interior
G L O S S A R Y
Zones bypassed, allowing free move-
ment within the premises.
Arming AWAY - Arming with ALL zones
protected.
Battery - Backup power source in the Go
-Anywhere Hub enclosure to provide
protection in the event of a power
failure.
BYPASS Button - Enables you to
manually
protective zones from the system.
Central Station - Monitors incoming
smaller
reports and emergency messages
from
the
communicator and notifies the proper
authorities.
Change Area - In a partitioned (two-
Area) system, a low-security operating
mode that allows arming by Area.
Chime - A keypad beep while disarmed
alerting that a programmed zone (for
example, a door) has been opened.
Communicator - Reports intrusions,
remove
one
or
more
Go-Anywhere
Hub
emergencies, openings, closings, etc.
directly to the central station.
Control Panel - The Go-Anywhere Hub
or the "brain" of the system; it controls
all system functions.
Easy Arming - (1) Quick arming in STAY
mode (hold down STAY). (2) Quick
arming in AWAY mode (hold down
AWAY).
Exit/Entry Delays - Separate delays that
let you exit and enter your premises
without tripping an alarm when the
system is armed.
Go-Anywhere Hub - The Control Panel
or the "brain" of the system; it controls
all system functions.
Instant Protection - Arming without entry
delay by pressing and holding the
STAY button while remaining within
the premises.
Keypad
-
Puts
Go-Anywhere
functions at your fingertips. It can be
mounted anywhere in your premises.
Hub
19
Advertisement
Table of Contents
