Table of Contents
Advertisement
A R M I N G A W A Y : S E T T I N G T H E A L A R M W H E N L E A V I N G
Arming the System
1. Check the keypad and Go-Anywhere Hub icons. The Hub green STATUS light must be on and
the keypad Window must display the word READY in order to arm. If the green STATUS light is off,
the number(s) of any unsecured zone(s) will display in the keypad Window. Refer to the pull-up zone
list for the location of each problem zone and secure by closing windows, doors, etc. When all zones
are secure, the Hub green STATUS light will light.
2. Arm the system. Enter your User Code followed by AWAY. The Hub green STATUS light will turn
off and the red ARMED light will turn on. Note: If you enter an invalid User Code, the keypad will
beep 4 times and a voice prompt will inform you of the invalid code. Re-enter your User Code.
3. Leave the premises. Leave through the exit door before the exit time expires.
Priority Arming
If you attempt to arm the system with a faulted zone, a 3-second tone will sound, the number(s) of any
unsecured zone(s) will display in the keypad Window, indicating that the zones must be secured before
the system can be armed.
Selectively Bypassing Zones
If you cannot locate or repair a faulted zone, it can be removed from the system, or bypassed. Bypass
the zone(s) from the system by entering your User Code and pressing BYPASS, followed by the zone
number (or vice versa). The BYPASS light on the Go-Anywhere Hub will turn on (and BYPASS will ap-
pear in the keypad Window) to indicate that a zone has been bypassed. Note: Bypassed zones are
unprotected! If a faulted zone cannot be secured, have the system checked as soon as possible.
7
Advertisement
Table of Contents
