Table of Contents
Advertisement
The iSecure ISEC-WL-KEYPAD
Wireless Battery-Powered Stand-
ard Keypad is a "smart", interac-
tive,
menu-driven
signed for your Napco iSecure
system. The keypad has a digital
LCD Window to show the status
of your system.
This booklet contains important
information about the operation of
your system with your keypad.
Read it carefully and keep it
handy for future reference. Check
the Glossary for an explanation of
Test your sounding device and backup battery
1. While disarmed, press MENU.
2. Answer "no" (press MENU) until "3" (Bell Test) appears in
the Window.
3. Press "yes" (ENTER) to execute the test. The alarm will
sound for about two seconds.
2
I N T R O D U C T I O N
terms that may be unfamiliar to
you.
You'll
keypad
de-
mentioned in this booklet that do
not apply to your system.
iSecure system and keypads have
such a wide variety of features
that few security systems, if any,
will ever need them all.
alarm professional has chosen
appropriate
particular needs.
Regardless of how your system
has been configured, rest assured
IMPORTANT - TEST YOUR SYSTEM WEEKLY
probably
find
subjects
The
Your
features
for
your
If the alarm does not sound, call for service.
If the battery in the Go-Anywhere Smart Hub is low, a
system trouble E-02 will appear in the Window. Allow
24 hours for the battery to recharge.
continues, call your alarm installer for service.
that it has been carefully designed
and engineered to the highest
industry standards.
optimum
safety
and
familiarize
yourself
equipment. Periodically check its
condition and state of readiness
by testing it at least once a week
in both the AC/battery and battery
-only modes (ask your alarm
professional how to make these
tests).
If the trouble
To assure
security,
with
this
Advertisement
Table of Contents
