Table of Contents
Advertisement
2. GENERAL SAFETY STANDARDS
Attention
Failure to comply with the basic safety standards or
precautions could lead to accidents during opera-
tion and maintenance. All the required accident pre-
vention measures must be taken while repairing the
machine. Lavazza will not be held liable for damage
caused by failure to comply with the general safety
standards provided in this manual.
The following are the main safety precautions to be
taken while operating on the machine. Lavazza cannot
foresee every possible situation which could entail a po-
tential hazard. Therefore the warnings provided in this
manual are not all-comprehensive. When making use
of tools, procedures, methods or work techniques which
are not specifically recommended, make sure they do
not place yourself or others in danger.
The adjustments, specifications and illustrations in
this publication are based on the information available
when drafted and therefore could change at any time,
affecting the maintenance to be carried out. Make sure
you have the most recent version of this manual.
The machine must be connected to the electric mains
in compliance with the safety standards in force in the
Country of use.
The machine must be connected to a socket which
must be:
- compliant with the type of plug installed on the ma-
chine, if included;
- sized according to the data provided on the nameplate
at the bottom of the appliance;
- connected to an efficient and up to standard earthing
system.
Before performing any operation on the machine, make
sure it is unplugged and cooled off.
To avoid the risk of electrical shocks, the electrical parts
of the machine and the components around them must
not:
- come into contact with any type of liquid;
- be handled with moist or wet hands;
- be tampered with.
It is prohibited to:
- use the machine in the vicinity of flammable and/or
explosive substances and/or in a fire risk atmosphere;
- use non-original spare parts;
- make any type of technical modifications of the ma-
chine not included in the standard diagnostic and re-
pair procedures.
2
Technical support maintenance manual
In case of fire, use carbon dioxide (CO
Do not use water or powder extinguishers.
If you must perform an unintended job or intervention,
following a procedure other than that indicated in the
manual, you must first consult the technical service.
Structural damage, improper modifications, tampering,
alterations or repairs can endanger the safety of the
machine.
2.1. STOPPING FUNCTIONS
The machine is switched off by disconnecting the power
cable plug from the electrical outlet.
To place the device in Standby, press the two buttons
on / dispense simultaneously for about 3 seconds.
To restart the machine, press one of the two buttons.
2.2. SAFETY DEVICES
The machine dealt with in this publication has been
manufactured in compliance with specific standards in
force and therefore all potentially dangerous parts are
protected.
The machine is equipped with the following safety de-
vices:
- Thermal protector 120 °C situated on the PUMP;
- Two thermal fuses 157 °C situated on the boiler to
protect the thermoblock.
Attention
Do not change, eliminate or by-pass the safety de-
vices in order to not cause serious risks to health
and safety.
2.3. RESIDUAL RISKS
The careful hazardous analysis performed, has allowed
most of the risks connected with operating and main-
tenance machine conditions to be eliminated. Lavazza
reminds the user that the instructions, procedures and
recommendations contained in this manual should be
strictly followed, and comply with the safety rules in
force, including the use of provided protection devices,
both integrated in the machine and individual.
This chapter illustrates the risks that the user may incur
if he does not comply with the specific safety rules as
described in this booklet.
- Do not work on the machine when it is powered. Be-
fore carry out any operations on the machine, discon-
) fire extinguishers.
2
Rel. 0.00 / June 2018
Hide quick links:
Advertisement
Table of Contents
