Sony AP-1 Operation Manual page 16

e Assignable buttons 1 to 3
These buttons execute the functions
assigned to assignable buttons 1 to 3 on the
camera.
Refer to the operation manual of the camera for
more information about assigning functions to the
assignable buttons.
f CANCEL/STATUS button
Cancels menu settings made in the
subdisplay and in the viewfinder connected
to the camera, or returns the display to a
previous state.
When no menu is displayed in the
viewfinder, you can press this button to
display information about the status of the
camera main unit.
Refer to the operation manual of the camera for
more information about the status information that
appears.
g RUN button and indicator
Starts and stops recording by the recorder or
camcorder attached to the camera.
The indicator lights during recording.
Note
This indicator also flashes to indicator a
camera main unit warning.
Refer to the operation manual of the camera for
more information about warnings.
h Assignable 4/AUTO BLK BAL (auto
black balance) switch
Push the switch down to the AUTO BLK
BAL side to start automatic black balance
adjustment.
Push the switch up to the 4 side to execute
the function assigned to assignable switch
4.
i PAGE button
In subdisplay screens, switches to the next
page or confirms settings.
16 Locations and Functions of Parts
j SET button
In subdisplay screens, hold this button
down for one second or longer to enter
settings modification mode.
This button also returns to the previous
subdisplay page.
k Subdisplay
Displays the menus and settings of the
camera main unit. The same information
appears in the subdisplay of the camera
main unit.
l MENU SEL (selection)/ENTER dial
In subdisplay and viewfinder screens,
selects menu items and confirms settings.