Configuring Pppoe Settings - HIKVISION DeepinMind iDS-6700NXI Series User Manual

 NO-IP:
1) Enter the Server Address as www.noip.com.
2) Enter the Domain you registered.
3) Enter the User Name and Password.
4) Confirm the password.
5) Click Save and then you can view the camera with the domain name.
Reboot the device to make the settings take effect.

4.3.4 Configuring PPPoE Settings

Your device also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Step 1 Go to Configuration > Network > Basic Settings > PPPoE Settings to enter the PPPoE settings
page.
Step 2 Check Enable PPPoE checkbox to enable this feature.
Step 3 Enter the User Name and Password, and confirm the password for PPPoE access.
DeepinMind Series NVS User Manual
Figure 4-12 NO-IP Settings
Figure 4-13 PPPoE Settings
35
iDS-67 00 Deep inMind Ser ies NVS User Manua l