Midea MTB1T-96CWN1 Technical & Service Manual page 87

MCAC-UTSM-201707

The transmitting symbol"▲" does not blink.
Symptom
Pressing ON/OFF
button, the remote
controller signal
cannot be
transmitted.

The temperature indicator does not light up.
Symptom
The temperature
indicator does not
light up.

The display disappears.
Symptom
After a while the
ON/OFF display
disappears.
After a while the
TIMING ON display
disappears.

No sound of receiving signal.
Symptom
Pressing the
ON/OFF button, the
air conditioner does
not raise the
receiving tone.
Check item
Check whether the batteries of
remote controller are low.
Check item
Check whether the mode
marked on the screen is Supply
air.
Check item
Check whether the time set on
the timer has expired.
Check whether the time set on
the time has expired.
Check item
When the ON/OFF button is
pressed, check whether the
signal transmitting part of the
remote controller is aligned with
the receiving part of the indoor
unit.
Check whether the power switch
of the air conditioner is
connected properly.
Midea R410A T3 50Hz Top-discharge Series
When the batteries are exhausted, the
signals cannot be transmitted.
In the Supply air mode, the temperature
cannot be set.
Cause
The air conditioner stops running
because the set time has expired.
When it comes to the set time of
starting operation of the air
conditioner, the air conditioner will
start running automatically, and the
corresponding display will disappear.
Cause
Align the signal transmitting part of the
remote controller with the receiving
part of the indoor unit. Then press the
ON/OFF button repeatedly.
The air conditioner cannot receive the
signals of the remote controller,
because it is shut down.
Cause
Cause
86