Midea MTB1T-96CWN1 Technical & Service Manual page 54

Midea R410A T3 50Hz Top-discharge Series

When in the new concrete roughcast environment, please use embedded bolts, embedded
pulling plugs and stick harness. On steel bar have some holes to hang pipe and embed
screw bolts.

When in steel beam and girder structure, set and use supportive angle steel.

After install the indoor units, use a hoisting device to hoist the indoor unit, and align it with
the installation screws to adjust the horizontality. Finally, Tighten the screws.
2.2 Designing and connecting the duct

The duct design must comply with the national heating air conditioner pipeline design
53
MCAC-UTSM-201707