MCAC-UTSM-201707
4. Installation of Outdoor Units
When installing the unit, leave a space for maintenance shown in the following figure. Install
the power supply at the side of the outdoor unit. For installation procedure, see the relevant
installation manual.
Use 4 steel ropes of a Φ6mm or bigger size to hoist the outdoor unit and convey into the
room.
In order to prevent scratch and deformity the outdoor unit, apply a guard board to the
surface of contact between the steel wire and the unit.
Remove the cushion used to protect the outdoor unit after finishing the transport.
Midea R410A T3 50Hz Top-discharge Series
58