Midea MTB1T-96CWN1 Technical & Service Manual page 101

MCAC-UTSM-201707
Note:
When the controller has been set to cool only, then there is no HEAT mode.
4) Fan speed setting
Under COOL, HEAT and FAN modes, press the fan speed button
setting.
After each fan speed button press will circle as follow:
Note:
Under AUTO and DRY modes the fan speed is not adjustable and the default fan speed is auto.
5) Temperature setting
Under AUTO, COOL, DRY, HEAT modes, press the temperature setting buttons
to set the temperature, the adjusting range is 17º C~30 º C (or 62 º F~88 º F).
Note:
The setting temperature cannot be adjusted under fan mode.
6) Timer on and timer off setting
Press the timer/clock setting button
will display
Press the buttons
each press
than 10 hours, each press
setting is 24 hours.
After finish adjusting the timer on setting, press the button
confirm and exit the timer on setting.
Under the timer on setting status, press the timer/clock setting button
timer off setting status, and the screen will display
and .
and to adjust the timer. If the timer setting is less than 10 hours,
or will increase or decrease 0.5 hour. When the timer setting is more
or
Midea R410A T3 50Hz Top-discharge Series
, then enter into the timer on setting status, and screen
will increase or decrease 1 hour, the maximum timer
and
can adjust the fan speed
and
or wait for 5 seconds to
, then enter into the
.
100