Midea MTB1T-96CWN1 Technical & Service Manual page 104

Midea R410A T3 50Hz Top-discharge Series
2.4 Installation of wired controller
1) Safety precaution

Read the safety precautions carefully before installing the unit. Stated below are important
safety issues that must be obeyed. Confirm there is no abnormal phenomena during test
operation after complete, then hand the manual to the user.

Please entrust the distributor or professionals to install the unit. Installation by other persons
may lead to imperfect installation, electric shock or fire.

Strictly follow this manual. Improper installation may lead to electric shock or fire.

Reinstallation must be performed by professionals. Improper installation may lead to electric
shock or fire.

Do not disassemble your air conditioner at will. A random disassembly may cause abnormal
operation or heating, which may result in fire.

Do not install the unit in a place vulnerable to leakage of flammable gases. Once flammable
gases are leaked and left around the wired controller, fire may occur.

The wiring should adapt to the wired controller current. Otherwise, electric leakage or
heating may occur and result in fire.

The specified cables shall be applied in the wiring. No external force may be applied to the
terminal. Otherwise, wire cut and heating may occur and result in fire.
 Don't place the wired controller near the lamps, to avoid the remote signal of the controller
to be disturbed.

Do not install the unit and controller in a place with much oil, steam, sulfide gas. Otherwise,
the product may deform and fail.
103
MCAC-UTSM-201707