Midea MTB1T-96CWN1 Technical & Service Manual page 58

Midea R410A T3 50Hz Top-discharge Series

There is natural drain, it is should be confirmed that the height of drain pipe is not higher
than water collection tray.

The number of bends and folds of the drain pipe should not exceed 2. Try to avoid bends to
prevent trash accumulation.

Open the side panel of the indoor unit, fill water inward, and check whether water can be
drained smoothly. Check whether water leak at the joint.

After making sure that water drains smoothly and no water is leaked, use adiabatic wool
bushes to preserve heat of the drain pipe. Ohterwise, condensate will occur.
57
MCAC-UTSM-201707