Cisco Catalyst C-ANT9103 Series Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Antenna
  5. Catalyst C-ANT9103 Series
  6. Manual

Cisco Catalyst C-ANT9103 Series Manual

2.4 ghz and 5/6 ghz dual-band polarization-diverse directional patch antenna
Hide thumbs

Advertisement

Table of Contents

Cisco Catalyst 2.4 GHz and 5/6 GHz
Dual-Band Polarization-Diverse Directional
Patch Antenna (C-ANT9103=)
First Published: March 13, 2020
Last Updated: April 17, 2020
This document describes the Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse
Directional Patch Antenna (C-ANT9103=), and provides electrical specifications and mounting
instructions.
The antenna is an octal DART port polarization-diverse patch antenna that operates over the 2.4 GHz
band and extended 5 GHz band (up to 7.125 GHz), and IoT. It has 8 RF paths and 16 digital lines. It also
has an LED. The antenna ships with an articulating mount for use on flat surfaces and masts, and is
adjustable in both horizontal and vertical planes.
The antenna is designed for use in indoor and outdoor environments with an approved Cisco Catalyst
series access point that requires four dual-band and four 5/6 GHz antennas. The antenna also includes
circuitry to enable self-identification of the antenna by the Cisco Catalyst Series access points.
The following information is provided in this document:
Cisco Systems, Inc.
www.cisco.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Catalyst C-ANT9103 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Cisco Catalyst C-ANT9103 Series

Summary of Contents for Cisco Catalyst C-ANT9103 Series

  • Page 1: Table Of Contents

    LED. The antenna ships with an articulating mount for use on flat surfaces and masts, and is adjustable in both horizontal and vertical planes. The antenna is designed for use in indoor and outdoor environments with an approved Cisco Catalyst series access point that requires four dual-band and four 5/6 GHz antennas. The antenna also includes circuitry to enable self-identification of the antenna by the Cisco Catalyst Series access points.

  • Page 2: Technical Specifications

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Technical Specifications 8-Element MIMO Dual-Band Polarization-Diverse Moderately Antenna Type Directional Patch, Wall/Pole Mount Operating Frequency Ranges 2.4–2.484 GHz 5.15–7.125 GHz 2.4–2.484 GHz (IoT) Nominal Input Impedance 50 Ohms...

  • Page 3: Azimuth And Elevation Radiation Patterns

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Azimuth and Elevation Radiation Patterns Elevation - Port A Azimuth - Port A Elevation - Port B Azimuth - Port B...
  • Page 4 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Elevation - Port C Azimuth - Port C Elevation - Port D Azimuth - Port D...
  • Page 5 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Elevation - Port E Azimuth - Port E Elevation - Port F Azimuth - Port F...
  • Page 6 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Elevation - Port G Azimuth - Port G Elevation - Port H Azimuth - Port H...

  • Page 7: Safety Precautions

    Call your local power company. They will remove it safely.  If an accident occurs with the power lines, call for qualified emergency help immediately. For a listing of all the warning statements and their translations, see Translated Safety Warnings for Cisco Aironet Access Points at: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/warnings/reference/guide/ap_warn1.html...

  • Page 8: Installation Notes

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Installation Notes Antennas transmit and receive radio signals that are susceptible to RF obstructions and common sources of interference that can reduce throughput and the range of the device to which they are connected. Follow these guidelines to ensure the best possible performance: ...

  • Page 9: Contents Of The Antenna And Bracket Kit

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Contents of the Antenna and Bracket Kit Figure 1 Contents of the Antenna Bracket Kit Cap plug. Four are included in the kit. -18 bolt. Two are included in the kit.

  • Page 10: Dimensions Of The Antenna And Brackets

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Dimensions of the Antenna and Brackets The dimensions noted in the following illustrations are all in mm, unless noted otherwise. Figure 2 Dimensions of the Antenna with Brackets and Cables...
  • Page 11 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 3 Locations of Screw Holes and Pressure Vent at the Back of the Antenna...
  • Page 12 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 4 Locations of the Screw Holes on the Articulating Mount Flange...

  • Page 13: Installing The Antenna

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Installing the Antenna You can install the antenna on a wall or ceiling (must be a flat surface), or on a pole with a minimum diameter of 2 inches (5.08 cm) and a maximum diameter of 5 inches (12.7 cm).
  • Page 14 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Tools and Equipment Required Warning IMPORTANT SAFETY INSTRUCTIONS Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Read the installation instructions before using, installing, or connecting the system to the power source.

  • Page 15: Step 1

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Mounting on a Wall or Ceiling Using Articulating Bracket The fasteners and mounting surface should be capable of maintaining a minimum pullout force of 150 Note pounds (68 kg) to support the weight of the antenna along with the potential wind loading on the antenna.
  • Page 16 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 5 Exploded View of Antenna and Bracket Hardware Assembly Antenna Mounting arm. One is included in the kit. -inch stainless steel flat washer. Four are included in -18 bolt.
  • Page 17 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 6 Cable Restraint on the Back of the Antenna Cable restraint. Stainless steel screw 1. Remove cable restraint when perpendicular cable routing is required.
  • Page 18 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 7 Close-Up View of the Azimuth and Elevation-Adjustment Pivots...
  • Page 19 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 8 Azimuth Adjustment...
  • Page 20 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 9 Elevation Adjustment...

  • Page 21: Mounting Directly On A Wall Through Mounting Holes On The Antenna

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Mounting Directly on a Wall Through Mounting Holes on the Antenna The fasteners and mounting surface should be capable of maintaining a minimum pullout force of 150 Note pounds (68 kg) to support the weight of the antenna along with the potential wind loading on the antenna.

  • Page 22: Mounting On A Pole Or Mast

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Mounting on a Pole or Mast The pole or mast must be rigid enough to hold the weight of an antenna along with the associated forces Note produced by wind loads.
  • Page 23 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 11 Antenna Bracket Hose Clamp Assembly for Pole Mounting Articulating mount flange attached to the back of the Worm-gear-type hose clamp (50–135mm) for mounting antenna. the assembly on a pole or mast.

  • Page 24: Mounting On A Wall, Ceiling Or Mast With Ap Mounted Directly On Antenna

    Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Mounting on a Wall, Ceiling or Mast with AP Mounted Directly on Antenna You can directly mount the Cisco Catalyst series C9130AX-E access point to the back of the C-ANT9103= antenna using the AIR-AP-BRACKET-9= bracket.
  • Page 25 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Figure 12 Exploded View of Bracket Hardware Assembly for Directly Mounting Access Point to Back of Antenna Cap plugs. Rubber feet. #8-18 stainless steel self tap screw.

  • Page 26: Communications, Services, And Additional Information

    Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
  • Page 27 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Cisco Bug Search Tool...
  • Page 28 Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse Directional Patch Antenna (C-ANT9103=) Cisco Bug Search Tool...

Table of Contents