Table of Contents
Advertisement
Quick Links
Cisco Multiband Omnidirectional Panel-Mount
Antenna (3G-ANTM-OUT-LP)
This document outlines the specifications and describes the 3G-ANTM-OUT-LP multiband
omnidirectional panel-mount antenna and contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
Cisco 90-Day Limited Hardware Warranty Terms
There are special terms applicable to your hardware warranty and various services that you can use
during the warranty period. Your formal Warranty Statement, including the warranties and license
agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and
download the Cisco Information Packet and your warranty and license agreements from Cisco.com.
1.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco 90-Day Limited Hardware Warranty Terms, page 1
Overview, page 3
System Requirements, page 8
Installation Notes, page 8
Safety Instructions, page 9
Installation Instructions, page 21
Obtaining Documentation, page 21
Documentation Feedback, page 22
Cisco Product Security Overview, page 23
Obtaining Technical Assistance, page 23
Obtaining Additional Publications and Information, page 25
Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
Advertisement
Table of Contents
Related Manuals for Cisco 3G Omnidirectional Outdoor Antenna - 3G Omnidirectional Outdoor Antenna
Summary of Contents for Cisco 3G Omnidirectional Outdoor Antenna - 3G Omnidirectional Outdoor Antenna
- Page 1 Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.
- Page 2 Ninety (90) days. Replacement, Repair, or Refund Policy for Hardware Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.
-
Page 3: Technical Specifications
The 3G-ANTM-OUT-LP antenna is a panel-mount omnidirectional antenna that operates in the 806 to 960 MHz and 1710 to 2170 MHz frequency bands, and is designed for use with Cisco 3G cellular HWICs. The 3G-ANTM-OUT-LP antenna is compatible with Cisco 3G cellular products using a threaded Neill-Concelman (TNC) Male connector. - Page 4 0.1”-0.5” thick Operating and storage temperature -40/+85 degree C Mechanical Impact Rating per IEC-62262 [IK08] 5 Joules Housing Protection rating IP 65 1. VSWR = voltage standing wave ratio Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 5 Overview Figure 2 shows the H-plane radiation pattern at 806 to 960 MHz for the 3G-ANTM-OUT-LP antenna. Figure 2 H-Plane Pattern at 806 to 960 MHz Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 6 Overview Figure 3 shows the E-plane radiation pattern at 806 to 960 MHz for the 3G-ANTM-OUT-LP antenna. Figure 3 E-Plane Pattern at 806 to 960 MHz Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 7 Overview Figure 4 shows the H-plane radiation pattern at 1710 to 2170 MHz for the 3G-ANTM-OUT-LP antenna. Figure 4 H-Plane Pattern at 1710 to 2170 MHz Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
-
Page 8: System Requirements
Figure 5 E-Plane Pattern at 1710 to 2170 MHz System Requirements The 3G-ANTM-OUT-LP antenna requires a Cisco 3G HWIC that uses a TNC-Male connector. Installation Notes This antenna is designed to be mounted outdoors on a horizontal panel. Follow these guidelines to ensure the best possible performance:... -
Page 9: Safety Instructions
In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332 Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01... - Page 10 Cable Distribution System. This product may connect to the Cable Distribution System ONLY through a device that is approved for direct connection. Statement 1078 Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
-
Page 11: Statement 1071-Warning Definition
éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01... - Page 12 Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 13 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 14 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 15 Safety Instructions Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 16 Safety Instructions Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 17 Safety Instructions Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 18 Safety Instructions Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 19 Safety Instructions Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
- Page 20 If the antenna is used in an environment where a lightning strike near the antenna is possible, Note consideration should be given to installing suitable lightning protection such as an arrestor or other protective means. Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP) OL-17930-01...
-
Page 21: Installation Instructions
Tighten the antenna nut to 60-84 in-lbs or 5-7 ft-lbs. Step 8 Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. -
Page 22: Documentation Dvd
Documentation Feedback Documentation DVD Cisco documentation and additional literature are available in a Documentation DVD package, which may have shipped with your product. The Documentation DVD is updated regularly and may be more current than printed documentation. The Documentation DVD package is available as a single unit. -
Page 23: Cisco Product Security Overview
Register to receive security information from Cisco. • A current list of security advisories and notices for Cisco products is available at this URL: http://www.cisco.com/go/psirt If you prefer to see advisories and notices as they are updated in real time, you can access a Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL: http://www.cisco.com/en/US/products/products_psirt_rss_feed.html... -
Page 24: Cisco Technical Support Website
Cisco TAC engineer. The TAC Service Request Tool is located at this URL: http://www.cisco.com/techsupport/servicerequest For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly. -
Page 25: Definitions Of Service Request Severity
Obtaining Additional Publications and Information Definitions of Service Request Severity To ensure that all service requests are reported in a standard format, Cisco has established severity definitions. Severity 1 (S1)—Your network is “down,” or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation. - Page 26 Flip Mino, Flip Video, Flip Video (Design), Flipshare (Design), Flip Ultra, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Store, and Flip Gift Card are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting...