Download  Print this page

Cisco 3G-ANTM1916-CM Manual

Multiband in-building omnidirectional ceiling-mount antenna
Hide thumbs

Advertisement

Cisco Multiband In-Building Omnidirectional
Ceiling-Mount Antenna (3G-ANTM1916-CM)
This document outlines the specifications and describes the Cisco 3G-ANTM1916-CM multiband
omnidirectional ceiling-mount antenna and contains the following sections:

Cisco 90-Day Limited Hardware Warranty Terms

There are special terms applicable to your hardware warranty and various services that you can use
during the warranty period. Your formal Warranty Statement, including the warranties and license
agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and
download the Cisco Information Packet and your warranty and license agreements from Cisco.com.
1.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
Overview, page 3
Installation, page 11
Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.

Advertisement

Table of Contents
loading

  Related Manuals for Cisco 3G-ANTM1916-CM

  Summary of Contents for Cisco 3G-ANTM1916-CM

  • Page 1: Table Of Contents

    Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.
  • Page 2 Ninety (90) days. Replacement, Repair, or Refund Policy for Hardware Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.
  • Page 3: Overview

    Overview Overview The Cisco 3G-ANTM1916-CM antenna operates in the 806- to 960-MHZ and 1710- to 2170-MHz frequency bands, and is designed for use with 3G high speed WAN interface cards (HWICs). The Cisco 3G-ANTM1916-CM antenna connects to the Cisco 3G wireless WAN HWICs using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector.
  • Page 4: Technical Specifications

    Technical Specifications Technical Specifications The following table lists the technical specifications for the Cisco 3G-ANTM1916-CM antenna. Antenna type Omnidirectional ceiling mount Operating frequency ranges 806 to 960 MHz and 1,710 to 2,170 MHz • <1.8:1 (806 – 960 MHz) Maximum VSWR bandwidth •...
  • Page 5 Technical Specifications Figure 2 shows the elevation cut (Advanced Mobile Phone Systems [AMPS]) for the Cisco 3G-ANTM1916-CM antenna. Figure 2 Elevation Cut (AMPS) Cisco Multiband In-Building Omnidirectional Ceiling-Mount Antenna (3G-ANTM1916-CM) OL-12658-01...
  • Page 6 Technical Specifications Figure 3 shows the azimuth cut (AMPS) for the Cisco 3G-ANTM1916-CM antenna. Figure 3 Azimuth Cut (AMPS) Cisco Multiband In-Building Omnidirectional Ceiling-Mount Antenna (3G-ANTM1916-CM) OL-12658-01...
  • Page 7 Technical Specifications Figure 4 shows the elevation cut (Personal Communications Service [PCS]) for the Cisco 3G-ANTM1916-CM antenna. Figure 4 Elevation Cut (PCS) Cisco Multiband In-Building Omnidirectional Ceiling-Mount Antenna (3G-ANTM1916-CM) OL-12658-01...
  • Page 8: System Requirements

    Figure 5 Azimuth Cut (PCS) System Requirements The Cisco 3G-ANTM1916-CM antenna is a remote antenna solution for the Cisco 3G wireless WAN HWICs and should be connected using the 20-ft or 50-ft ultra-low-loss (ULL) cables recommended for this product. Cisco Multiband In-Building Omnidirectional Ceiling-Mount Antenna (3G-ANTM1916-CM)
  • Page 9: Installation Notes

    This antenna is designed to be mounted indoors on a suspended ceiling track having either flush or recessed mounted ceiling tiles. In addition to the antenna orientation, the installation location of the Cisco 3G wireless HWIC plays a significant role in determining overall network performance with respect to all the wireless clients.
  • Page 10 3G-CAB-ULL-50 50 ft (15 m) 500–2000 MHz -3.50 dB, maximum Figure 6 shows the ULL cable recommended for Cisco 3G Wireless WAN HWICs. Figure 6 Ultra-Low-Loss Cable Recommended for Cisco 3G Wireless WAN HWICs TNC Male RA Heat Shrink Tube TNC Female Straight 1.
  • Page 11: Safety Instructions

    If an accident or emergency occurs with the power lines, call for qualified emergency help • immediately. Installation Install the Cisco 3G-ANTM1916-CM antenna with the following hardware that is included in the package: Wood screws • •...
  • Page 12: Documentation Feedback

    Documentation DVD Cisco documentation and additional literature are available in a Documentation DVD package, which may have shipped with your product. The Documentation DVD is updated regularly and may be more current than printed documentation. The Documentation DVD package is available as a single unit.
  • Page 13: Cisco Product Security Overview

    Register to receive security information from Cisco. • A current list of security advisories and notices for Cisco products is available at this URL: http://www.cisco.com/go/psirt If you prefer to see advisories and notices as they are updated in real time, you can access a Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL: http://www.cisco.com/en/US/products/products_psirt_rss_feed.html...
  • Page 14 Cisco TAC engineer. The TAC Service Request Tool is located at this URL: http://www.cisco.com/techsupport/servicerequest For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
  • Page 15: Obtaining Additional Publications And Information

    Obtaining Additional Publications and Information Definitions of Service Request Severity To ensure that all service requests are reported in a standard format, Cisco has established severity definitions. Severity 1 (S1)—Your network is “down,” or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
  • Page 16 Obtaining Additional Publications and Information Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering • professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL: http://www.cisco.com/ipj...