Finishing The Installation - Savoy House 62-5085-3CN-109 Owner's Manual

NOTE: LIGHT KITS ARE AVAILABLE AT YOUR
SAVOY HOUSE RETAILER. THE FAN IS ALREADY
WIRED TO SUPPORT THE LIGHT KIT OPTION.
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR OTHER PERSONAL
INJURY. MOUNT FAN ONLY ON AN OUTLET
BOX OR SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT.
8. FINISHING THE
INSTALLATION
Step 1. Tuck connections neatly into ceiling
outlet box.
Step 2. Slide the canopy up to hanger
bracket and place the key hole on the canopy
over the screw on the hanger bracket, turn
canopy until it locks in place at the narrow
section of the key holes.
Step 3. Align the circular hole on canopy with
the remaining hole on the hanger bracket,
secure by tightening the two set screws.
Note: Adjust the canopy screws as necessary
until the canopy and canopy cover are snug.
(Fig.13)
Warning: Make sure tab at bottom of hanger
bracket is properly seated in groove of
hanger ball before attaching canopy to
bracket. Failure to properly seat
tab in groove could cause damage to
electrical wiring.
FAN
LIGHT
Outlet box
Hanger
bracket
6
POWER LINES 120V
GREEN
GROUND
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
WH
BLUE
BLK
WH
LIGHT
Figure 12
Canopy cover
Figure 13
Screws
Canopy