Installation Of Safety Support; Make The Electric Connections - Savoy House 62-5085-3CN-109 Owner's Manual

6. INSTALLATION OF
SAFETY SUPPORT
An additional safety support is provided to
prevent the fan from falling.
safety cable to the ceiling joist with screw and
washer, as illustrated in Figure 9.
7. MAKE THE ELECTRIC
CONNECTIONS
Remember to disconnect the power.
Follow the steps below to connect the fan to
your household wiring. Use the wire
connecting nuts supplied with your fan.
Secure the connectors with electrical tape.
Make sure there are no loose strands or
connections.
Step 1 Connect the fan supply (black) wire and
light supply (blue) wire to the black household
supply wire as shown in Figure 10.
Step 2. Connect the neutral fan (white) wire
to the white neutral household wire.
Step 3 Connect the fan ground wire (green)
to the household ground wire.
Step 4 After connecting the wires, spread
them apart so that the green and white wires
are on one side of the outlet box and the
black and the blue wires are on the other
side.
Step 5 Turn the connecting nuts upward and
push the wiring into the outlet box.
Figures 11 and 12 illustrate the wiring
connections for optional wall control (The
wire color out of wall control may vary, see
wall control's installation manual for correct
wire connections.)
Secure the
5
Hanger bracket
Figure 9
POWER LINES 120V
BLUE
BLK
Figure 10
LIGHT
SWITCH
BLUE
BLK
Figure 11
Safety cable
GREEN GROUND
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
WH
WH
LIGHT
POWER LINES 120V
GREEN GROUND
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
WH
WH
LIGHT