Download Print this page

MadgeTech TCTemp1000 Product Information Card

Advertisement

Quick Links

Part Number
Internal Channel Temperature Sensor
Internal Channel Temperature Resolution
Internal Channel Calibrated Accuracy
Remote Channel Temperature Sensor
Range, Resolution & Accuracy
Cold Jct. Compensation
Memory
Sample Rate
LED Indicator
Channels
Required Interface
Baud Rate
Typical Battery Life
Operating Environment
Material
Dimensions
Approvals
* Remote Channel Range, Resolution & Accuracy
Thermocouple
Range (°C)
J
-210 to +760
K
-270 to +1370
T
-270 to +400
E
-270 to +980
R
-50 to +1760
S
-50 to +1760
B
+50 to +1820
N
-270 to +1300
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 80°C (176°F).
TCTemp1000
Semiconductor
0.1°C
+0.5°C
*See Table for Details
Automatic
16,383/channel
2 seconds up to 12 hours
None
1 Internal & 1 Remote
IFC110 or IFC200
2,400
1 year
-40 to +80°C 0 to 100%RH
303 stainless steel
7.4" x 1.2" x dia. (188mm x 31mm dia.)
CE
Resolution
Accuracy
0.1°C
+0.5°C
0.1°C
+0.5°C
0.1°C
+0.5°C
0.1°C
+0.5°C
0.5°C
+2.0°C
0.5°C
+2.0°C
0.5°C
+2.0°C
0.1°C
+0.5°C
Product Information Card
TCTemp1000
Rugged Thermocouple Based Temperature Data Logger
TCTemp1000
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289

Advertisement

loading

Summary of Contents for MadgeTech TCTemp1000

  • Page 1 Product Information Card Part Number TCTemp1000 TCTemp1000 Internal Channel Temperature Sensor Semiconductor Internal Channel Temperature Resolution 0.1°C Internal Channel Calibrated Accuracy +0.5°C Remote Channel Temperature Sensor *See Table for Details Range, Resolution & Accuracy Cold Jct. Compensation Automatic Memory 16,383/channel...
  • Page 2 Submergibility - Enter in any other desired parameters and click Start. The TCTemp1000 is fully submergible and is rated IP68. It can be placed in environments - A box will appear stating the data logger has been started. Click OK.