Section 1 - General Safety information
Warning
Follow these instructions very carefully, in order to avoid injury to yourself or others.
Electrically powered machine.
Always ensure that all power to the machine has been turned off and isolated before
ANY maintenance / repair work is carried out on the machine.
Ensure that all guards are correctly fitted before starting or attempting to operate the
machine.
Ensure that all fasteners are present and correctly fitted before attempting to start or
operate the machine.
Ensure that the pump unit is correctly fastened to the front of the hopper unit of the
machine, and free of damage before attempting to start or operate the machine.
Ensure that the main electric drive motor assembly, is secured to the rear of the hopper,
clamped in place and free from damage before attempting to start or operate the machine.
The MP-25 mixing pump unit can produce high pressures, high torques and can use high
voltages. Care must be taken by all users.
Only authorized and trained persons should work with this machine.
Page 5