Table of Contents
Advertisement
Section 4 – Machine set up
Unpacking
Remove the safety grid from the top of the machine by removing the 4 bolts, clips and
washers, using the provided 7/16" AF wrench . Keep all parts to be used to replace the
grid later.
Remove all items from the hopper, excluding the mixing shaft, but including the pressure
tester, the power cord and socket assembly, the Quality check sheet and user manual, and
the wired remote. Check that the hopper inside is clear of all items except for the mixing
shaft..
Consult the final inspection record supplied in the packaging for details of your machine
and the items checked prior to shipment. Keep this document for your records.
Page 36
Advertisement
Table of Contents
