Parts Counting Function; Percentage Weighing Function; User Calibration Function - Adam Equipment LBK Series Manual

6.4 PARTS COUNTING FUNCTION

• Press [Tare] to switch on or off the part counting function.
• "OFF PCS" :part counting function is off.
PCS" : part counting function is on.
• "ON
• Press [Unit] key to confirm the setting and look through the next
setting. It would enter the percentage weighing when it shows "On
PEr " or "OFF PEr".

6.5 PERCENTAGE WEIGHING FUNCTION

• Press [Tare] key to switch on or off this function.
• "OFF
• "ON PEr": the percentage function if on.
• Press [Unit] key to confirm the setting and look through the next
setting. It enters user's simple cal function when it displays "On
or "OFF CAL".

6.6 USER CALIBRATION FUNCTION

• Press [Tare] key to switch on or off the function.
• "OFF
• "ON CAL" : the function is on, when the user cal function is off in
weighing mode, press [Func] key to overleap this function and move to
the next setting.
• Press [Unit] key to confirm the setting and enter the next setting. It
enters unit setting when it shows "On
© Adam Equipment Company 2014
PEr ":the percentage function is off.
CAL" : the function is off.
g " or "OFF g".
CAL"
12