LEGRAND radiant WWRL10WHCCV2 Manual page 4

3a | wire smart switch
Use the wire nuts provided to secure the wires together.
Connect the WHITE neutral wire on the switch to the neutral wires in the
a
box, using the red wire nut.
b
Connect the LOAD wire on the switch to the load wire in the box.
Connect the HOT wire on the switch to the hot wire(s) in the box.
c
d Connect the GREEN ground wire on the switch to the ground wire(s) in the box.
If the light is controlled with only one switch, use a wire nut to cap the
e
YELLOW traveler wire on the device and proceed to step 4.
If the light is controlled by two or more switches (3-way), see 3b
for instructions.
Load
Supply
"Hot"