LEGRAND radiant WWRL10WHCCV2 Manual page 7

6 | attach wall plate
a
Use the sub-plate screws (provided) to secure the sub-plate to the
smart switch.
b
Tighten device screws to secure to the electrical box.
c Angle the
Push the screwless wall plate down and in until it "snaps" into place over
the sub-plate.
NOTE:
To remove the wall plate, place the tip of a flat blade screwdriver into the slot
under the wall plate and twist gently.
end of the wall plate over the top edge of the sub-plate.
a
1
b
2 3
c