LEGRAND radiant WWRL10WHCCV2 Manual page 5

3b
(optional)
This product will work with existing three-way switches. To wire Smart Switch to
the electrical panel side of the circuit.
Connect the WHITE neutral wire on the switch to the neutral wires in the
a
box, using the red wire nut.
b
Connect the LOAD wire on the switch to one of the two traveler wires (the
wires connected to the gold screws) in the box.
Connect the HOT wire on the switch to the hot wire(s) in the box.
c
Connect the GREEN ground wire on the switch to the ground wire(s) in the box.
d
Connect the YELLOW wire to the remaining traveler wire in the box.
e
Gold
Screw
Load
WWRL10
| wire 3-way smart switch
Load
Black
Screw
Gold
Screw
NOTE: To wire Smart Switch to the load side of the
circuit. Connect the HOT wire on the switch to load
that is being controlled.
SCAN TO SEE HOW TO
WIRE 3-WAY SWITCH
Supply
"Hot"
Supply
"Hot"
Black
Screw
Gold
Screw
Gold
Screw
WWRL10