LEGRAND radiant WWRL10WHCCV2 Manual
  1. Manuals
  2. Brands
  3. LEGRAND Manuals
  4. Switch
  5. radiant WWRL10WHCCV2
  6. Manual

LEGRAND radiant WWRL10WHCCV2 Manual

Smart switch wi-fi
Hide thumbs
Table of Contents

Advertisement

Quick Links

Smart Switch, Wi-Fi

Advertisement

Table of Contents
loading

Related Manuals for LEGRAND radiant WWRL10WHCCV2

Summary of Contents for LEGRAND radiant WWRL10WHCCV2

  • Page 1 Smart Switch, Wi-Fi...

  • Page 2: Before You Start

    • Do not use with loads exceeding the device load rating. Visit www.legrand.us/radiant/smart-lighting/support for support. what you need REQUIRED: YOU MAY ALSO NEED: Voltage tester, pliers, wire cutter, wire Phillips-head screwdriver stripper, electrical tape, fl...

  • Page 3: Installation And Setup

    installation & setup turn off power to device at circuit breaker Flip existing light switch multiple times to confirm power is off. NOTE: Ensure power is off to all devices in electrical box. Load Supply “Hot” remove existing device Check for the following wires: HOT or LINE: Receives power from the circuit box.
  • Page 4 wire smart switch Use the wire nuts provided to secure the wires together. Connect the WHITE neutral wire on the switch to the neutral wires in the box, using the red wire nut. Connect the LOAD wire on the switch to the load wire in the box. Connect the HOT wire on the switch to the hot wire(s) in the box.
  • Page 5 wire 3-way smart switch (optional) This product will work with existing three-way switches. To wire Smart Switch to the electrical panel side of the circuit. Connect the WHITE neutral wire on the switch to the neutral wires in the box, using the red wire nut. Connect the LOAD wire on the switch to one of the two traveler wires (the wires connected to the gold screws) in the box.

  • Page 6: Troubleshooting Tip

    secure smart switch Fold wires into electrical box, taking care not to pinch a wire. Use included screws to secure smart switch to electrical box. Do not fully tighten the screws. test the smart switch NOTE: See getting to know your switch section for feature details. Turn the power back on at the circuit breaker and press switch to turn light on/off.
  • Page 7 attach wall plate Use the sub-plate screws (provided) to secure the sub-plate to the smart switch. Tighten device screws to secure to the electrical box. Angle the end of the wall plate over the top edge of the sub-plate. Push the screwless wall plate down and in until it “snaps” into place over the sub-plate.
  • Page 8 Download and launch the Smart Lights, Wi-Fi app by Legrand. The app is available on the App Store or on Google Play. SCAN TO DOWNLOAD Connect your smart switch to your home network by following the step by step instructions in the app.

  • Page 9: Getting To Know Your Switch

    getting to know your switch Item Name Description • Press the top of the paddle to turn the light Paddle Switch on and the bottom to turn the light off. • Indicates the current state of the device. LED Locator Light Refer to “LED Locator Light Explanations”...

  • Page 10: Regulatory Information

    regulatory information FCC NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation.

  • Page 11: Rf Exposure Statement

    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the transmitter’s radiating structure(s) and the body of the user or nearby persons. NOTE: Any changes or modifications to this device that are not expressly approved by the manufacturer will void the warranty and the user’s authority to operate...

  • Page 12: Warranty

    Additional warranty details are available at under your device’s product page. specifications Load Rating Resistive 120 VAC, 60 Hz,15 A Incandescent/halogen 1800 W Ballast 15 A standard/electronic Motor 1/2 HP Legrand reserves the right to change specifications without notice.
  • Page 13 PHONE: 1-877-833-3303 8:00 a.m. to 8:00 p.m. EST (M-F) EMAIL: smartlighting@legrand.us CHAT: https://www.legrand.us/radiant/smart-lighting.aspx (Click on the icon to open a dialogue box)
  • Page 14 Legrand, North America 50 Boyd Avenue Syracuse, NY 13209 1-877-833-3303 www.legrand.us...

Table of Contents