Related Manuals for pottery barn kids BLYTHE MIRROR VANITY DESK TOPPER
Summary of Contents for pottery barn kids BLYTHE MIRROR VANITY DESK TOPPER
- Page 1 BLYTHE MIRROR VANITY DESK TOPPER www.potterybarnkids.com Date: 2014-July-15 Rev: Page 1 of 4...
- Page 2 The use of power tools to aid in assembly is not recommended. Power tools can damage the hardware and split the wood. Parts Included: Blythe Mirror Vanity Desk Topper(x1) (A) Middle Mirror (x1) (B) Left Mirror (x1) (C) Right Mirror (x1)
- Page 3 Hardware Included: (E) – B all Tip Allen Key 4x95x30mm (F) – Allen Bolt 1/4”x38x13mm (x8) (G) – Spring Washer (x1) 1/4x10x1.5mm (x8) (H) – Flat Washer 1/4x12x1.5mm (x8) (I) – Machined Screw 5 /32x13mm (x12) Assembly Instruction Steps: 1. Place the Middle Mirror (A) on the carpet or the foam from inside the shipping box. 2.
- Page 4 8. Insert 8 sets of: Flat Washer (H), Spring Washer (G), and Allen Bolt (F) through the pre-drilled holes on the Supports and into the pre-inserted nuts, as seen in the illustration below. 9. Tighten with Allen Key (E). 10. If needed, adjust the levelers underneath the bottom legs (up or down) to keep the whole set level, as seen below.