Page 2
Important Safety Instructions: Please read all instructions carefully before assembling this Desk. • For your safety, assembly by two or more adults is strongly recommended. • Keep these instructions for future use. • Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the •...
Page 3
Assembly Instruction Steps: 1. Gently remove the drawer box from Storage Base (C) and keep the drawer box for later use. 2. Connect the Storage Base (C) and Leg Panel (B) to the Stretcher (D), with the wooden dowels and pre-drilled holes aligned, as shown in the illustration below.
Page 4
7. Attach Top Panel (A) to the assembled piece with the wooden dowels and pre-drilled holes aligned. 8. Insert 6 sets of: Short Bolt (G), Spring Washer (H), and Flat Washer (I) from the pre-drilled holes on the wooden cleats found inside the Storage Base and Leg Panel, and into the metal inserts pre-installed on Top Panel (A). 9.
Page 5
12. Check alignments before tightening all connecting bolts. 13. Place the Drawer Box (removed in Step 1) back into the assembled desk. 14. Adjust the levelers found on the bottom of the legs (up or down) to keep the desk level when needed. 15.
Page 6
FURNITURE TIPPING RESTRAINT WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision. Manufacturer assumes no liability for improper installation or excessive loads placed on screws, brackets or straps. Young children may be injured by tipping furniture and the use of a tipping restraint is highly recommended.
Need help?
Do you have a question about the ELLIOT DESK and is the answer not in the manual?
Questions and answers