Related Manuals for pottery barn kids EVERETT MODULAR DESK LARGE CORNER TOP
Summary of Contents for pottery barn kids EVERETT MODULAR DESK LARGE CORNER TOP
- Page 1 EVERETT MODULAR DESK LARGE CORNER TOP www.potterybarnkids.com Date: 25-Apr-16 Page 1 of 6 Rev:...
- Page 2 Important Safety Instructions: Please read all instructions carefully before assembling this desk. For your safety, assembly by two or more adults is strongly recommended. Keep these instructions for future use. Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the structural integrity of the item.
- Page 3 Hardware Required (From Drawer Base): E – Flat Washer G – Bolt F - Spring Washer H - Allen Key 1/4” x Ф13 x 1-8x 1/4” x Ф11 x 1.2- 8x 1/4” x 1”- 8x M4 x 110mm x 30-1x Assembly Instruction Steps: 1.
- Page 4 3. Attach (O) to (R) and secure with (Q), as shown in the illustration below. A Philips Head Screw Driver is required to tighten. Do not over tighten. 4. Attach the assembled Desk Top to (B) by aligning the pre-drilled holes with the wooden dowels and secure with the hardware, as shown below.
- Page 5 6. Put the Drawers back into the Drawer Bases (B) by bending the rubber stoppers as needed to allow the drawer to enter the Drawer Base. This will require some force to get the drawers back into the Drawer Bases. Make sure the wooden drawer runners and the rubber stoppers are properly aligned as you re-install the drawer If the desk does not sit level adjust the levelers underneath the legs, as seen in the illustration below.
- Page 6 Multiple Desks can be combined together by following the assembly instructions below: 8. Place the Desks in the desired location. 9. Align the Desks together. 10. Place a Mending Plate (C) over the metal insert holes on the rear side of the Desk Tops, as seen below. 11.
Need help?
Do you have a question about the EVERETT MODULAR DESK LARGE CORNER TOP and is the answer not in the manual?
Questions and answers