Factory Values - BEA LZR P110 User Manual

5
SAFETY FIELD CONFIGURATION
5.1 SAFETY FIELD TEACH-IN
Launch a teach-in after changing the sensor position or when new objects are added to or changed in
the detection zone. The sensor will learn its surroundings and adapt the detection field shape to these.
Objects in the detection field will be cut out.
During teach-in, the detection field should be free of snow buildups, heavy rain, snowfall, fog or other
moving objects.
5.2 FIELD WIDTH
After teach-in, the field width should be reduced by remote control.
no field
Ex:
The distance between the inner curtains of the 2 sensors must
ensure the detection of the CA testbody (700 x 300 x 200 mm)
according to EN 16005 and DIN 18650.

FACTORY VALUES

3 s
The door has to complete at least 1 full cycle (open + close) for
the sensor to learn its environment. During this operation there
is no safety on the door!
Once the door has completed its cycle, you can wait for the
teach-in process to finish or lock the sensor by remote control:
MIN MAX
-
0.5 m
5.0 m
for a field width of 4.2 m
max. 30 s
LZR-P110 ON SLIDING DOORS 7