Technical Specifications; California Proposition 65 - Graco SaniSpray HP 20 Operation - Repair - Parts

Technical Specifications

Technical Specifications
SaniSpray HP 20 Cordless Airless Handheld
Max Working Pressure
Weight
Dimensions:
Length
Width
Height
Storage Temperature Range 
Operating Temperature Range
Storage Humidity Range
Sound Pressure Level
Sound Power Level †
Vibration level (Measured in
accordance with EN 50580:2012)
Charger Power Source
Battery
Voltage (DC)
Maximum tip orifice
Notes
Pump damage will occur if disinfectant or water freezes in pump.

Damage to plastic parts may result if impact occurs in low temperature conditions.

† All readings were taken in priming mode at the assured operator position. Sound power
levels were tested to ISO 3741 at 3.3 feet (1m).
* Maximum initial Battery voltage (measured without a workload) is 20 volts. Nominal voltage
is 18.

California Proposition 65

CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm –
www.P65warnings.ca.gov.
30
U.S.
1000 psi
5.25 lb
14.0 in.
5 in.
11.8 in.
32° to 113° F
40° to 90° F
0% to 95% relative humidity, non-condensing
83.0 dBa
94.0 dBa
Uncertainty K = 3 dBa
Vibration total value
2
a = 21.5 ft/s
h
Uncertainty K = 0.3 ft/s
100 – 120 Vac, 50 Hz, 15A, 1 Ø
20 V MAX* 2.0 Ah Li-ion
Compact Battery Pack DEWALT
0.019 in.
Metric
6.9 MPa, 69 bar
2.4 kg
36.1 cm
12.7 cm
30.0 cm
0° to 45° C
4° to 32° C
Vibration total value
2
a = 6.5 m/s
h
2
Uncertainty K = 0.1 m/s
0.48 mm
2
3A7649A