Cleaning Vacuvalve - Graco SaniSpray HP 20 Operation - Repair - Parts

Cleanup and Storage
This sprayer is equipped with a static wick
that reduces the build-up of static charge
to reduce the risk of fire and explosion.
KEEP THIS SURFACE CLEAN.
•
Do not allow water to freeze in sprayer.
•
Do not store sprayer under pressure.
Confirm the Prime Pump/Spray Knob is
downward in PRIME position.
•
Store sprayer in an upright position only.
•
Store sprayer indoors in a cool, dry
place.
•
Store Spray Tip, Spray Tip Guard, and
Pump Filter with sprayer so they are
available for the next job.
22
ti30635a
ti29755a

Cleaning VacuValve

The VacuValve is an important part of your
sprayer and it should be cleaned after every
use.
1. Remove VacuValve Cap from Cup Lid
and clean it.
2. Clean VacuValve Reservoir in lid.
3. Clean VacuValve Air Hole. If VacuValve
Air Hole becomes clogged, use a paper
clip to clean the hole.
ti23406a
4. Install VacuValve Cap back onto Cup
Lid.
5. Make certain the VacuValve Cap is
closed.
ti29723a
3A7649A