How To Spray; Choose Your Spray Tip - Graco SaniSpray HP 20 Operation - Repair - Parts

How to Spray

Use only disinfectants approved for
spray application.
Fumes from disinfectants with alcohol
active ingredients, or from other
flammable disinfectants, can explode or
ignite. Sprayer generates sparks. To
prevent fumes from exploding or igniting:
•
Keep spray area well-ventilated.
•
Keep a good supply of fresh air moving
through the area.
•
Follow Static Grounding
Instructions, page 23.

Choose Your Spray Tip

To avoid serious injury from skin injection,
do not put your hand in front of the Spray
Tip when installing or removing the Spray
Tip and Spray Tip Guard.
Your sprayer comes with 3 Spray Tip sizes:
Fine
Medium
Coarse
Your sprayer comes from the factory with the
Medium size Spray Tip installed. Select the
appropriate Spray Tip size to provide the
acceptable spray of disinfectant. Refer to
disinfectant label for manufacturer's
recommendations.
To prevent Spray Tip leaks, make certain
Spray Tip and Spray Tip Guard are installed
properly.
1. Perform Pressure Relief Procedure,
page 10.
3A7649A
LP313
LP515
LP619
How to Spray
2. Use Spray Tip (A) to insert seal (B) into
Spray Tip Guard (C).
3. Insert Spray Tip into Spray Tip Guard.
Verify Spray Tip is forward in the SPRAY
position.
4. Screw Spray Tip Guard assembly onto
sprayer and hand tighten.
15